Browse our library
Select the mural that you like from our extensive library. Alternatively, contact us if you would like your own image printed or added to our library.
Add Dimensions
Enter the width and height in centimetres(cm) or Inches(inch). Follow our guide on how to measure your wall if required. Other options that are available include black and white, and flip image. Checkbox to add 3cm bleed all around will be automatically checked. If you are covering the entire wall, this is recommended for installation.
Crop Mural
The aspect ratio of the image will likely not match your wall exactly, as it is a standard library. We have a range of images from full panoramic to square. It is advised to select an aspect from this library that closely fits your wall dimensions. Move the crop window to where you want your mural and set.
Select your material
There are multiple materials to select from. Choose the material based on your application.
Add to basket and Checkout
To finalise purchase, simply add to basket and checkout securely via card or PayPal. We provide free delivery in the UK, Europe, USA. Please see our shipping prices for further details.
How to measure your wall
Entering correct measurements for your mural is key. We can only print to your specifications. An error here can be costly and time consuming later. We can start with the simplest flat walls that are square/rectangle in shape, the standard wall.
The Standard wall
Measure the absolute perimeter of the wall mural surface. This will leave you with 2 lengths for the width (top and bottom) and 2 lengths for the height (left and right). Typically, each of these 2 lengths will match each other, but if they do not, choose the longer of the 2. Now you will have a single value for the width and height of the surface the mural will cover. This value can be entered when selecting your mural.
Do not include skirting boards, coving or any other obstacle outside of the flat surface. These measurements are the bare mural surface.
Odd shaped walls
As with measuring for a standard wall, take measurements of the perimeter of the wall. Choose the value of the longest width and longest height. The mural will be made to a rectangle shape and any odd shapes can be removed prior to installation.
If your wall contains any windows or doors, just ignore these when taking the measurements and used the overall size as described above. Doors and windows are trimmed away during installation.
Add a little extra
Walls are usually not exactly square, and we must allow for this. We can add 3cm to your measurements when we print your mural. That can be trimmed away during install. This option will be automatically checked for you when ordering.
You don’t have to order a mural to cover your entire wall, but there is a minimum order size.
Please make sure the measurements are double checked before ordering. We are working to the information you provide to us.
Contact us for further advice on how to measure your walls, we’re always happy to help.
Before you begin – wall preparation
All walls must be spotlessly clean, dry, flat and free from any blemishes that may show through. Unprepared walls may reject the mural.
To install on a plastered wall
Preparing the wall is the most important part of the process.
- Ensure the wall is properly prepared – it must be clean and dry with no loose plaster.
- The wall MUST be smooth and free from any texture.
- You MUST coat your wall with a good quality primer/sealer. This will help seal a porous surface.
To install on a painted wall
- We recommend that you install over matt emulsion paint only.
- DO NOT use washable paints, and avoid gloss paints where possible.
- If you have an old painted wall with some loose or flaky paint we recommend that you correctly prepare the surface and then coat your wall with a primer/sealer before installing.
- If your wall has been freshly painted, please allow 2 to 3 weeks drying time before installing your mural.
Giving the wall a light sand, paying particular attention to the corners and edges will help give a smoother surface for the mural to adhere to.
It is advised to clean the wall with a damp rag or sponge. Make sure wall is perfectly DRY AND CLEAN, paying particular attention to edges and corners prior to installation.
Paper surface
- Remove any old paper. If not, the new mural may not stick down properly.
- DO NOT USE lining paper underneath this mural.
Check your Mural
Please check your entire mural carefully before you begin to install. Lay the panels out and leave to rest for at least 3 hours. If you notice any defects with the material or image, please STOP and contact us straight away.
Do not install the mural if you see these issues:
- Creases
- Defects
- Marks
- Panel edges issues
- Image issues
Tips
Do not pre-trim your mural before installing
Do not rub the mural surface vigorously during installation and overwork the seams.
We recommend that TWO people install this mural together to help achieve the best results.
What you'll need
Tape measure
Spirit level
Stanley knife/cutting knife
Straight edge
(for trimming)
Squeegee
1. Getting started
Please ensure you have read ‘Before you begin – wall preparation’ instructions. We strongly recommend preparing your wall.
- The wall mural is supplied in ‘drops’. Carefully unpack each of the ‘drops’ and lay them out in order.
- Start from the left or right and work from a straight plumb line. Measure the first panel width. Measure in from the wall edge less the 3cm trim if ordered and draw a straight vertical line using spirit level and straight edge.
2. Installing the first drop/panel
- Working on a clean and dry floor surface, place your first panel on the floor image side down, carefully peel a small amount of the backing paper (about 20cm) from the top of the mural.
- Apply the top of the panel to the wall, ensuring that the right hand edge aligns with your vertical line. Allow an overlap of 3cm at the top, at the bottom, and on the left hand side.
- Using the squeegee, work the mural onto the wall, working from the centre outwards.
- Carefully peel away the rest of the backing paper from the mural, gently applying it to the wall as you go until you reach the bottom of the panel. Peeling about 20-30cms at a time. Work the mural onto the wall from centre out.
- If you need to re-position any part of the panel, simply peel the appropriate amount away from the wall and re-apply, gently smoothing the mural out as you go.
3. Additional panels
- Our murals have allowed an overlap of 2.5cm on each panel. Apply the second and subsequent panels, ensuring the pattern or image matches up as you go and that the appropriate amount of bleed runs over the top and bottom edges.
- As there is an overlap of 2.5cm for each panel. It is advised to use two people for this. Use small pieces of masking tape to keep the image overlap in place until the top of the panel is installed.
- Gently place the panel into position and adjust as appropriate.
- Follow the same process of smoothing the panel, ensuring this is done very gently. Do not overwork the seams.
- Continue to apply all middle panels before installing the last panel, which should be your far left or far right panel, depending on which side you started.
- Use your thumb to press down on the mural around the corners of light switches and electrical sockets. Then, carefully cut a cross in the mural between these marks so it looks like an envelope. Trim away the excess vinyl. You can also tuck the vinyl behind the switch or socket by loosening the screws, but this should only be done by a qualified electrician.
4. Trim top, bottom and side
- When all panels have been installed, carefully trim the top and bottom of your panels plus the far left and far right sides, using a straight edge. Don’t rush this and ensure you have sharp blade to achieve the best results.
- Check that edges are securely adhered.
We can help
While we stand by our simple installation system, we understand that not everyone has the capability to install murals themselves.
For a fee, our trusted local installation expert will come and fit your mural for you, just contact us after you have made your purchase and we will organise the details. This service is currently only available in Leinster.
If you have any queries or request on this service please email us at: